Protewax


protewax

UV-resistant

Water-repellent and non-sticky after curing
Protewax description

PROTEWAX BP 527 is a poly-acrylic wax and serves as temporary resistant and crystal clear protection against moisture and corrosion on axles, frames and chassis parts, as well as on painted underbody of classic vehicles, and also on aluminium, chrome and galvanized surfaces, such as fuel tanks, bumpers, steps, etc.. The protective coating is UV resistant.

Application

Clean the parts to be coated thoroughly beforehand, then always apply cleaner H 102 with clear water, if oxidation as aluminium is already present, apply at least 5 minutes at 20 °C and then clean with a strong water jet or high-pressure cleaner. After drying, apply PROTEWAX BP 527 with a spray gun or a soft brush and allow to dry for 2 hours at low humidity and approx. 20 °C. PROTEWAX BP 527 does not stick and remains crystal clear. PROTEWAX BP 527 can be removed very easily with the cleaner DE 26/27 or high pressure.

Protewax Spray Description

PROTEWAX BP 527 is a polyachryl wax and serves as a temporarily resistant and crystal clear protection against moisture and corrosion on painted surfaces, also painted vehicle underfloors, on aluminium, chrome, as well as on galvanized surfaces. The protective layer cures quickly and is UV-resistant.

Application

Thoroughly clean parts or surfaces to be coated. PROTEWAX BP 527 does not stick and remains crystal clear. To remove, use special cleaner DE 26/27 or remove with high pressure cleaner.

Diese Website verwendet Cookies. Mehr Informationen

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close